Roller
-
Excavator Front track idler JCB JS200 JS220
The broadly optional guiding wheel suits for caterpillar excavating machine and special machinery ranging from 3 to 50 tons. It includes such types as castin, welding and manufacturing, etc. The special heat treatment technology prolongs the service life and makes it endure the heavy load and prevent smash to a maximum extent.
-
Excavator Carrier Roller Komatsu PC30
The function of carrier roller is to carry the track link upwards, make certain things are linked tightly and enable the machine to work fester and more steadily. Our products use special steel and produced by new process. Every procedure goes through strict inspection and the property of compressive resistance and tension resistance can be ensured.
-
Excavator Sprocket Rim Caterpillar CAT 215 CAT225
Motion provided by power generator of an excavator is conveyed to track link by running motor and sprocket rim. The teeth of sprocket rim should fit the track link well and should be able to drive the link steadily. Even when the link stretches due to wear and teat of its pin and bushing, the teeth should fit well. Usually, a sprocket rim is placed at the back part of the running device of an excavator.
-
Excavator Sprocket Komatsu PC300-7 PC400-5
Diving gears with complete models and types are available for excavating equipment ranging from 0.8 to 100 tons.
Adopts precision processing technology and special heat treatment technique, so reach the best wear-resistance and prolong life time to maximum extent. -
Excavator Track Roller Komatsu 20Y-30-00012 PC200-6
The function of the track roller is to convey the weight of an excavator to the ground. When an excavator is run on uneven ground, track rollers carry a tremendous impact. Therefore, the support of track rollers is huge. Moreover, if it is of poor quality and is often dusty, it needs a very good sealing to prevent dirt, sand, and water from damaging it.